...fibre optic devices and cable to filter the strength of the fibre optic signal. Depending on the type of attenuator attached to the devices at each end of the fibre optic cable, you can diminish the strength of the light signal a variable amount, me...

...Bending a fibre cable • One of the most important considerations when installing fibre optic cable is maintaining the minimum bend radius. Bending a fibre cable excessively may cause the optical signal to refract and escape through the cladd...

...connectors. • USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0 to support bidirect...

Free Space Optics • Free Space Optics • Advantages of Free Space Optics • LaserLinks are capable of transmitting virtually any kind of digital information including data, voice and video. Thus they fit easily into a wide variety of application...

...way and needs special cable material and connectors. 10 Gigabit on RJ45 uses a line encoding scheme. • You may also find equipment with XENPAK modules. These module types are already phased out. Currently the XFP module type is the main standard f...

...mainly. • Cables that supports DDC transmission • Optimum resolutions and maximum resolutions as well as Gamma values part of this protocol. If a monitor is directly attached to a graphic adapter card the only concern is to have a conn...

...of connectors. • The cable • The USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0...

...Uses “Thin“ coax cable (RG58A/U or RG58C/U). • The maximum length of one segment is 185 metres. • The maximum number of segments is five. • The maximum total length of all segments is 925 metres. • The minimum distance between T-connectors is...

...is to have a connection cable that supports DDC transmission ( VGA: pins 12 an 15 need to be connected). • An extender or a switch in between? • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all...